Customer materials being prepared for quilting

Customer-Supplied Materials

If polyester wadding isn't right for your product, send us yours. We regularly quilt foam, felt and natural fillings.

Customer-supplied quilted fabric sample
Custom material quilting example
Finished customer material project

A Large Share Of Our Work Is Material We Didn’t Sell You

Foam, felt, wool, cotton batting, hollowfibre, barrier fabrics and technical non-wovens.

Customers send us their own fillings, usually because their end market specifies a particular material, or because they buy it more cheaply at their own volumes than we could. Either is fine — our pricing does not penalise it.

Supplied materials are treated exactly like our own stock: booked in against your order, stored dry, allocated only to your jobs. Nothing gets substituted without a phone call.

Standard Width
1500–1600mm
Maximum Width
2400mm
Stock Wadding
70–300gsm
Minimum Order
One sample panel; no set-up charge on repeat patterns

Limits worth knowing before you ship

Honest constraints

  • Foam above roughly 10mm becomes difficult to feed evenly under a multi-needle head
  • Very open or poorly bonded battings can drift and pill between stitch lines
  • Shedding materials — raw fibreglass, loose mineral wool — must be enclosed between fabrics
  • Anything with specified fire performance must arrive with its documentation

Fabrics We Quilt

Designed to Handle a Wide Range of Materials

Woven fabrics
Knitted fabrics
Ripstop materials
Coated nylons
Cotton
Polycotton
Satin
Canvas
Velour
PVC-backed fabrics
Non-woven materials

Limits worth knowing before you ship

Honest constraints

Foam above roughly 10mm becomes difficult to feed evenly under a multi-needle head

Very open or poorly bonded battings can drift and pill between stitch lines

Shedding materials — raw fibreglass, loose mineral wool — must be enclosed between fabrics

Anything with specified fire performance must arrive with its documentation

The safe route: a sample run first

1.

Send one roll

Tell us the pattern and the fabric it is going between.

2.

We quilt a panel

We run a panel on the same machine and settings your production would use, so the sample is representative rather than optimistic.

3.

You get an honest assessment

If your material will not feed evenly, pill between stitch lines or hold the pattern, we tell you at this stage rather than after a production run.

4.

Stock is returned or held

Whatever is left goes back to you, or stays booked in against your name for the production run.

Weight and pattern are one decision, not two

Heavier waddings need larger patterns, because a light stitch gap compresses the fibres and makes the quilting feel thin. Specify weight and pattern together, and we will recommend the minimum stitch gap to ensure your wadding lofts properly after quilting. We will also back it in a weight and pattern pairing.

Why Work With Us?

Built Around Manufacturers

We only provide commission quilting

We never manufacture competing finished products

No direct competition creates better results for you

Experienced quality inspection on every roll

Sampling available to verify specifications

Fast turnaround on repeat orders

Team handling customer-supplied materials

Other Services

Tell us what you need quilting

Send us your fabric and filling, tell us the pattern, and we will quote you on the work.